designed
specifically for off shore oil rigs
6,750 psi Tensile strength equal to US Highway concrete!
PROJECT PICTURES CERTIFICATIONS APPLICATION
PRODUCT
DESCRIPTION:
RUSTGRIP ® is a one-part polyurethane
coating that combines with atmospheric moisture to cure. Upon curing, RUSTGRIP
® provides a protective coating of superior adhesion, flexibility
and abrasion/impact-resistance. It is resistant to chemical solvents and acid
splash. Originally designed for metal surfaces, RUSTGRIP
® demonstrates excellent adhesion to wood, concrete, fiberglass
and many other substrates. RUSTGRIP ®
is designed for the encapsulation of and adherence to tightly-bonded surfaces
of lead-based and other toxic paints as well as rusted surfaces.
This unique
ability is accomplished by the curing mechanism of the base polymer. The coating
(having a low initial viscosity) wets the surface, then penetrates into the
pores of the substrate where curing begins. RUSTGRIP
® actually becomes part of the substrate unlike a surface coating
which just bonds on top. The polymer literally begins to swell, developing an
interlocking network between the pores of the surface and the coating. RUSTGRIP
® is highly recommended as a base coat for
SUPERTHERM ®. No pot life, no catalyzation, no two-part
mixing. RUSTGRIP ® is
not a sacrificial rust inhibitor such as a zinc enriched primer that will wear
out over time but in fact a permanent rust proofing which is why it is a certified
( ASTM E1795 ) Biohazard Encapsulator. RUSTGRIP
® has also passed 15,000 hours of salt spray testing which are marine
specifications and consequently has achieved DNV certification.
Can substitute for zinc-rich primer requiring no white sandblasting. Can be
applied over rusted surfaces after loose/flaking material is removed. High humidity
quickens the dry / cure cycle.
The difference
between a surface coating and RUSTGRIP ® !
A surface coating does not have the special solvent carrier to allow it to enter the pores of a substrate and carry the body of the coating into the pores with it. The surface coating will bite into anything above the pore area and adhere to the surface by attaching to any roughness. This works well in most areas until the surface of the coating is exposed to weathering and other elements over time allowing oxidation and acid rain to enter through its pin holes and begin the migration of corrosion.
RUST GRIP ® is made with special solvent carriers that allow the coating to penetrate into the pores carrying the body of the coating with it. Once the body of the coating is in the pores, it begins to absorb the moisture from the atmosphere and gases itself or does a microscopic swell inside the pores that anchors it into the metal or any other surface. This action does allow the coating to become part of the actual surface with is different than all other industrial coatings. Also, its high molecular weight allows the coating to become extremely tough. Being an aromatic urethane in nature, it is already extremely resistant to acids. Its non-leafing metallics allow an encapsulation of the surface and adds additional toughness and UV control to its surface.
PHYSICAL
DATA:
* Solids: By weight 70.5% / By Volume 62%
* Bridges - two coats
by brush or roller - 8 mils wet;
4 mils dry
* Cure time at 70F (21C): 2
hours to touch. Overcoat
with RUST GRIP or other coatings immediately
after
surface is dry to the touch to achieve
proper adhesion. Higher temperatures
and humidity
will shorten cure times, lower temperatures
will slow curing.
*
Lead and Chromate free
* Cures by reacting to moisture in the air
* Weight:
9.5 lbs. per gallon
* Surface Tensile Strength: 6,780+ psi
* Vehicle Type:
Aromatic polyurethane
* Shelf Life: up to 3 years (unopened) under appropriate
storage
conditions (see MSDS)
* VOC Level: 400 grams/liter
* Impact Resistance:
200+ psi front/160+ psi back
* Can withstand temperatures up to 300F. deg.
FEATURES:
USDA approved ( safe around food ) Lead & chromite free
Patented Biohazard
Encapsulation ( ASTM E1795 )
Outstanding Adhesion ( ASTM D3359 ) Coated over
18 coats of oil based paint, penetrating through all 18 coats and secured to the
substrate
6,750 psi Tensile strength equal to US highway concrete in strength
Performed 20,000 Window Cycling tests equal to 54 years
Not affected by acid
splash
Guards against all corrosions
Subjected to - 350F degrees nitrogen
at Air Products Co. without effect
Can withstand + 325F degrees constant heat
before the resins burn out
Guards against all corrosions
Not affected
by acid splash
LIMITED
WARRANTY :
Unless Superior Products provides a written
warranty of fitness for a particular use, Superior Product's sole warranty is
that the product, as supplied, will meet then current sales specifications and
is specific only to return of product found to be defective upon opening of container
within one year. Customer's exclusive remedy and Superior's sole liability for
breach of warranty is limited to refund of the purchase price or replacement of
any product shown to be other than as warranted and Superior Products expressly
disclaims any liability for incidental or consequential damage.
Aren't you tired of having to do repeated surface repair and maintenance?
WE OFFER AN. . .
