TIlt up concrete Insulation ADVANTAGES

SUPERTHERM®
Multi ~ Ceramic Thermal Barrier Coating
Technical Data Sheet
Certifications

INSULATION EFFECTIVENESS

Scientifc Technical Explanation
"At any rate, given these values, please note that a 10-mil thickness of SuperTherm is the same as 6” of fiberglass in Thermal Conductivity." - PhD Inn Choi

ASTM E1269 \ ASTM E1461-92

Ashrae 90.1 Code Compliance
(Laboratory Tests reference ASTM C 236)

Letter Equivalent R19

2015 R19 Equivalency Letter

Interior Hot Box Test Results

ISBU Association Report on Ceramic Coatings

CI (CoNTINOUS INSULATION)

No thermal bridging due to continuous insulation

MOISTURE BARRIER

Insulation Effectiveness increases as moisture evaporates during curing.
Once cured, does not lose insulating value when moisture is present.
Reduced moisture penetration and reduced condensation adds to insulation effectiveness.

ASTM D 6904 Standard Practice for Resistance to Wind-Driven Rain for Exterior Coatings Applied to Masonry
ASTM D 7088 Standard Practice for Resistance to Hydrostatic Pressure for Coatings Used in Below Grade Applications Applied to Masonry
ASTM E 96 Standard Test Methods for Water Vapor Transmission of Materials water vapor transmission
ASTM E 514 Standard Test Method for Water Penetration and Leakage Through Masonry Resistance to Wind Driven Rain
ECAP Report Energy Conservation Assistance Program - Standard Method for Comparing Utility Loads in Standard Constructed Buildings (Page 5)

CUI (Corrosion under insulation) / EffLORESCENCE

No CUI / efflorescence due to no trapped moisture

fLAME SPREAD & SMOKE INDEX

Flame Spread "0" & Smoke Developed "0" (CAN/ULC-S102 Equivalency)

Repair

Extremely Durable

Installation

Industry Best Practice - 2 coats cross hatched to a total of 17.82 mils WFT = 9.98 mils DFT

Lumens

Reduced Lighting Costs

mOLD rESISTANce

No mold due to no trapped moisture

ASTM D 3273-82T Standard Test Method for Resistance to Growth of Mold on the Surface of Interior Coatings in an Environmental Chamber
ASTM D 3274 Standard Test Method for Evaluating Degree of Surface Disfigurement of Paint Films by Microbial (Fungal or Algal) Growth or Soil and Dirt Accumulation - Rating degree of fungal growth or soil and dirt accumulation on paint film

NestinG material

Does not provide nesting material for rodents or insects.

eNVIRONMENTALY FRIENDlY

Cradle to Cradle (Gold Certification)

Health ConcerNs

None
Water-Based



HOME
HOME