PRODUCT DESCRIPTION:
WATER BASED EPOXY is a two component, amine-cured, epoxy coating which will demonstrate the physical properties of solvent-borne epoxies, but in a water-reducible formula. Dust and residue formation is a problem with unprotected concrete floors and cement toppings. WATER BASED EPOXY water-reducible epoxy floor coating was developed as a premium quality, environmentally friendly answer to this problem Based on two-component epoxy technology. WATER BASED EPOXY displays excellent penetrating properties which consolidates the concrete substrate. At the same time, WATER BASED EPOXY produces a surface coating/film that will exhibit outstanding water- and chemical-resistance, excellent resistance to acids, solvents, oils, and gasoline and a superior combination of impact, abrasion, and scuff-resistance. Most importantly, WATER BASED EPOXY offers the performance characteristics mentioned above in a water-reducible formulation In the past, the physical toughness and resistance properties such as those that WATER BASED EPOXY will provide was possible only from solvent-borne products. WATER BASED EPOXY should be considered for all interior concrete sealing applications where superior durability is required and solvent odors and flammability are not acceptable.
FEATURES:
Outstanding toughness
Waterborne epoxy
Excellent flexibility
Outstanding water and chemical resistance
Excellent resistance to acids, solvents, oils and gasoline
Superior combination of impact, abrasion and scuff-resistance
Can be tinted to any custom color
CHARACTERISTICS:
45% solid by volume
Vehicle type: amine-epoxy
Pigment type: Varies with color
Weight per gallon: 9.2 lbs./gallon
(3.43 kilograms/3.785 liters)
Dry Time: To touch: 45-60 minutes Dry hard:8 hours To recoat:4-6 hours (to touch)
Recommended film thickness: 3-6 mils dry (75-150 microns) Each coat - 245 sq. ft. (22.78 M2) 6.5 mils (162.5 microns) wet (wet mil gauge recommended) 3.0 mils (75 microns) dry
Solvent: water
Gloss: full gloss
Heat-resistance: 225°F (107°C)
78 Sec 3.2 Inside Painting System #1
Pot Life: 6-8 hours
Mix ratio: 1 part curing agent to 8 parts base (80% of pint to 90% of a gallon)
Induction Period: 30 minutes
Minimum storage temperature: 32°F (0°C)
VOC: 1.2 lbs./gallon (144 grams/liter)
